To assist our clients, Lenderink is associated with a very compotent manufacturer. We offer short and long runs.
CUT TO SIZE:
2 computerized beam saws with auto loading and scoring for accurate chip free cutting. These machines are built for mass production and can cut as many as 6 sheets of 3/4″ plywood at a time.
CUSTOM ROUTING:
With state of the art CNC Routers, we are able to route panel sizes up to 144″ x 144″. Our repeatability tolerances are +/- 0.0008″. We have capabilities for vertical and horizontal drilling, index sawing, and multi head operation. Routing one part or ten thousand parts, Lenderink is a one stop source for machined panels.
FLAT LAMINATION:
We use a polyurethane reactive glue line for lamination. PUR adhesive allows us to laminate endless varity of substrates and surfaces including fiberglass, foam, plywood, veneer, aluminum and HPL. PUR adhesive is made from 100% solids so it will not add moisture to the substrate. This insures that the substrate will not warp or bend as it reaches equilibrium.
UV EDGE COATING:
We provide state of the art UV Edge Coating capabilities. We can coat the edges of shelves, drawer sides and casegoods to match our panel face coatings. Let the natural good looks of a multi-ply edge show through with UV Edge Coating.
ADDITIONAL INFORMATION:
Our UV Coating line is one of the largest in North America. We can handle 5’x5′, 4’x8′, 4’x10′, 5’x10′ and 5’x12′ in any thickness from 1/8″ up to 2″. Our automated stacking system can handle any configuration you require from face to face, back to back, all face up, all face down or any combination in between. Our process is as many as eleven steps depending on the type of panel being finished. Specialty finishes such as anti-microbial, high wear, scratch resistent, dry-erase and other opaque finishes are also options. We can even custom color match to your other wood products. Priming and fill and sand are available, if you prefer to apply your own top coat.
