No More Waiting for Glue to Dry.
No More Clean Up.
No More Uneven Adhesive Applications.
The cost-effective Lenderink Laminating System adheres a surprising variety of sheet or roll stock laminates using high performance hot melt film #200 and #200PBE and more adhesives. It feeds a substrate and our eco-friendly hot melt adhesive film under infrared heat; laminate is then joined using compression rolls for a finished, ready-to-use panel.
Industrial Infrared Laminator for Fast, Clean Panel Laminating
- Laminate widths from 211 to 6111 (5 cm to 155 cm) wide – any length panels
- Laminated output ready for immediate fabrication
- No waiting for drying
- No messy white glue, sprays, or contact cement
- No dripping, no overspray
- No clean up required
- Includes multiple safety features
- Requires little floor space
Easier Height Adjustment
The laminators include single wheel roller height adjustment with digital height indicator for fast, single-operator adjustments. Up to 4″ thick material.
American Made With Renewable Energy
Our Infrared Laminators and #200 adhesives are manufactured and assembled in the USA. The plant is powered by solar panels and a wind turbine.
Roll Stock Feed Attachment
The optional roll stock feed attachment allows users to easily feed rolled stock laminate material (such as melamine, gator ply, fabric, etc.) The unit is fitted with 3″ (7.6cm) core chucks and an air clutch which supplies consistent tension across The unit is fitted with 3″ (7.6 cm) core chucks and an air clutch which supplies consistent tension across the pay out bar.
Hot Knife Adhesive Cutter
The optional hot knife adhesive cutter is a heated arm that reaches across the width of your laminator. The operator won’t need to bend over the panel to cut adhesive. Instead, quick flick of the wrist pushes the arm through the adhesive, making a fast and clean cut.
Infeed & Outfeed Conveyors
These conveyors extend the length of the machine, making it easier to handle full size panels. Your laminating machines can be fitted with additional conveyor sections as needed. Conveyor sections are available in 5′ {152 cm) lengths and can be ordered with or without legs.
Lenderink Lamination System Gallery
The Lenderink Lamination System is designed to bond a wide range of materials to virtually any substrate. Using Lenderink adhesives and industrial laminating equipment, manufacturers can laminate materials quickly, cleanly, and consistently.
Below are examples of materials that have been successfully laminated using Lenderink adhesives and laminating systems.
-
- Paper-Backed Wood Veneer bonded to Aluminum Honeycomb
-
- Packaging Foam bonded to EVA Foam
-
- PE Foam bonded to Urethane Foam
-
- Open Cell Polyethelene bonded to Polystyrene
-
- Oak Tambour bonded to Latex Filled Paper Curved
-
- Luan bonded to Polyethelene Honeycomb
-
- Linoleum bonded to Furniture Grade Plywood
-
- Leatherette bonded to EPS Foam
-
- Leather bonded to MDF
-
- Lamé Fabric bonded to Crumboard
-
- HPL bonded to Particleboard bonded to Backer Board
-
- HPL bonded to Paper Honeycomb
-
- HPL bonded to expanded polystyrene
-
- Horizontal Grade Laminate bonded to Slatwall Foam
-
- Horizontal Grade Laminate bonded to Insulation Board
-
- Hook-and-Loop bonded to Styrofoam
-
- Hook and Loop bonded to Natural Lambs Wool
-
- Hogs Hair bonded to Synthetic Felt
-
- High Pressure Laminate bonded to Particleboard
-
- Foil Backed Foam bonded to NGO Board
-
- Floor Pad bonded to EPS Foam
-
- Fireproof fabric bonded to closed cell foam
-
- Fiberglass Woven bonded to Rigid Fiberglass Insulation
-
- Fiberglass Scrim bonded to Ceramic Foam
-
- Fiberglass reinforced panel bonded to styrofoam
-
- Fabric bonded to Rubber bonded to PVC Board
-
- Fabric bonded to EVA Foam
-
- F-40 Foam bonded to 0007 Polycarbonate Film
-
- EVA Foam bonded to EVA Foam
-
- Cork bonded to Crumb Board bonded to Butile Rubber
-
- Cork bonded to Cardboard
-
- Chipboard bonded to Styrofoam
-
- Carpet bonded to Marine Grade Plywood
-
- Burlap Fabric bonded to Cardboard Honeycomb
-
- Bulletin Board Cork bonded to Paper Honeycomb
-
- Brushed Aluminum bonded to Neoprene
-
- Aluminum Foil bonded to Plywood Flooring
-
- Acoustic Insulation Felt bonded to Aluminum Foil
-
- ABS Plastic bonded to Blue Foam
-
- 58 Particle Board bonded to Acrylic Sheet
-
- 12 Foam bonded to 12 Foam
Infrared Laminator Process Video
Industrial Infrared Laminator Specifications
The Lenderink infrared laminating system is engineered for high-speed panel lamination using dry film adhesives. Designed for wood veneer, laminates, fabrics, films, and composite materials, this industrial laminator delivers consistent bonding, clean operation, and reliable production performance.
Laminating Capacity
- Output width up to 61″ (155 cm)
- Optional model output width 49″ (124 cm)
- Output length unlimited panel length
- Maximum output thickness 4″ (10 cm)
- Works with flat sheets or roll stock
Performance
- Production speed (single phase) 6–8 feet per minute
- Production speed (three phase) 8–12 feet per minute
- Ideal for wood veneer, laminates, fabrics, films, and high-gloss surfaces
Machine Controls
- Roller height adjustment single wheel adjustment
- Digital height indicator included
- Roller material chrome-plated steel, durable and easy to clean
Power Requirements
Single Phase
- Voltage 208 or 230 V
- Heatbank 10.5 kW (208V) / 11 kW (230V)
- Amperage 60 amp draw + 2 cutoff
Three Phase
- Voltage 208 or 230 V
- Heatbank 15 kW
- Amperage 45 amp draw + 2 cutoff
Machine Dimensions
- Machine width 83″ (211 cm)
- Machine length 180″ (457 cm)
- Machine height 55″ (140 cm)
- Weight 1,536 lbs (697 kg)
Available Options
- Roll stock feed attachment
- Hot knife adhesive cutter
- Outfeed conveyor
Interested in seeing the Infrared Laminator in action?
Schedule a demonstration at the Lenderink Campus R&D Lab and Showroom near Grand Rapids, Michigan.
Feel free to contact us with any questions or to request additional information.