Most Popular Adhesives Product List – Large Volume Pricing
Urethane, Polyester, Copolyamid, Melamine, EVA, PolyPro, Fire Retarded
*Please Note: Due to some of the adhesives being clear or sheer, they have been placed on a black background for photography purposed.
Powder Adhesives
Thermoplastic, Thermoset, and Many Other Formulas Available. Can be used for:
- Automotive
- Aircraft
- Fabric
- Foam
- Furniture
- Metals
- Filters
- Partitions
Web Adhesives
Web Is Lowest Cost (No Bubbles)
#59W Dry Film Adhesive
Thickness: .015″ Pressing Temperature: 200•F+ Pressure: Low Pressure
- Bonds: foam, fabric, wood, fiberglass, filters and more
- NO SHRINK
- Acoustic
- Breathable (for perforation)
- Many formulas available
Film Adhesives
Can be reapplied and reactivated at the CORRECT TEMPERATURE.
#200 Dry Film Adhesive
Thickness: .007″ Pressing Temperature: 200•F+ Pressure: Low Pressure
- Clear
- Can melt in place with radiant heat or iron
- No wrinkle or shrink
- Permanent bond
- For H.P.L. Plastic, wood, fabric, foam, moisture barrier
- From 100% Green Plant, No electricity used, From the Grid
#200V Dry Film Adhesive
Thickness: .007″ Pressing Temperature: 225•F+ Pressure: Low Pressure
- Same as #200 but with Plasticizer blocker
- Bonds PVC’s, vinyls, plastic and more
- From 100% Green Plant, No electricity used, From the Grid
#300 Dry Film Adhesive
Thickness: .002″ Pressing Temperature: 170•F+ Pressure: Low Pressure
- Clear
- Bonds to most materials
- Excellent for fabric
- Sample cards
- Sample book
- Tip Ons
- And More
#344L Dry Film Adhesive
Thickness: .0016″ Pressing Temperature: 266•F+ Pressure: Any Pressure
- Bonds aluminum, plastics, PVC vinyls and more
- Used in automotive dashboards
- Comes with release liner
#363 Dry Film Adhesive
Thickness: .001″ Pressing Temperature: 270•F+ Pressure:
- Clear with release liner
- High friction, NO SLIP
- Bonds numerous very unique films and foams
#600S Dry Film Adhesive
Thickness: .006″ Pressing Temperature: 220•F+ Pressure:
- Inner hinge layer (polyester) for extreme strength and bend-ability.
- No tape mitre folding
- For furniture, caskets, wood laminating, boxes, 2 ply printable veneers
#700S Dry Film Adhesive
Thickness: .003″ Pressing Temperature: 175•F+ Pressure:
- Inner hinge layer (polyester) for extreme strength and bend-ability.
- No tape mitre folding
- For furniture, caskets, wood laminating, boxes, 2 ply printable veneers
Thermoset
Lower temperatures and pressures are available. Contact us for more information.
#2 TS-SU Dry Film Adhesive
Thickness: .005″ Pressing Temperature: 250•F+ Pressure: 85 PSI
- Permanent Bonds
- Clear/Translucent
- Fire Retarded
- Particle board may need higher temperature and pressure
- Easy to handle/NOT brittle
- Will laser cut
- Highly water resistant
- Can also be used as protective overlay film
#24 TS-SU Dry Film Adhesive
Thickness: .006″ Pressing Temperature: 250•F+ Pressure: 100 PSI+
- Permanent bonds
- Extreme exterior
- Dark tan
- Translucent
- Fire retarded
- Handles ok
- Can be used as protective overlay film, cement forms and exterior plywood
#330 TS Dry Film Adhesive
Thickness: .008″ Pressing Temperature: 275•F+ Pressure: 90 PSI
- Permanent bonds
- Extreme exterior
- Dark tan
- Translucent
- Fire retarded
- Handles ok
- Can be used as protective overlay film, cement forms and exterior plywood
#581 Dry Film Adhesive
Thickness: Pressing Temperature: Pressure:
- The very best for NO SHRINK, water resistance, wood to wood and wood to metals
- Many uses – auto wood dashboards, wood glass frames and unique deco
PSA (Pressure Sensitive Adhesive)
No heat needed.
Dot Matrix Pressure Sensitive Adhesive
Thickness: Pressing Temperature: Pressure:
- 140 dots per square inch
- No waste
- No bubble
- Easy transfer
#486 Pressure Sensitive Adhesive
- The VERY BEST
- Clear
- Thick or thin
- With or without polyester inner layer
- Extreme bonds
